Assembly Instructions - Cabbiez Badge Holder

Assembly Instructions - Cabbiez Badge Holder
1. Front, Backplate support is preassembled during production. Removal of this piece isn’t required

    2. It is recommended to insert the 0.5mm thinner clear protective screen into the badge holder first.

    3.Next, place your taxi driver badge into the holder.

    NOTE – it appears that not all badges are the same thickness and size. Earlier badges are thinner than the newer style badges, often with the words “property of TFL” printed on the back.
    Cabbiez badge holders have been designed as a one size fits all solution to all badges with slight tolerances to accommodate the differences in sizing.

    4. Next, Place the foam insert on top of the badge before placing the back plate on. The foam has been designed to allow for the differences in thicknesses in badge sizes, providing a nice snug fitment

    6. Finally place the backplate compressing the foam/sponge insert onto the badge holder, noting the small locating step ensuring the backplate sits flush with the badge holder and all the holes are lined up correctly. Insert the screws with the supplied mini screwdriver.

    Note - the screws should fit smoothly if there is any resistance check and align the screws correctly.

    please do not overtighten screws, finger tight is sufficient to secure the badge holder together

    You Cabbiez badge holder is now ready to be worn with a lanyard of your choice

    Thank you for purchasing and be lucky!!